GrnEyedDvl
In the midst of chaos, there is also opportunity
- Joined
- Jan 6, 2007
- Messages
- 27,637
- Solutions
- 2
- Reputation
- 2,603
- Points
- 395
- Location
- Denver CO
- Quote
- My new Custom Quote with 60 character limit which is 2 rows.
One of the things I like to do that I haven't really talked about much on TWC is work with wood. I have a small woodshop at my house (upgrading that this summer and will post pics of the progress) and I have made all kinds of stuff. Things like shelves and small pieces of furniture and once even a custom deck for someone's boat. But what I really like to do is make small things that do not take a lot of time, and then give them away. I have a couple of brain teaser/puzzle designs I created, and a few years ago I got into making things on the lathe. I have done candlesticks and even magic wands like in Harry Potter, but what I really like to make on the lathe is pens.
These are pretty simple once you get the hang of it, and they make great gifts. I buy the hardware kits online, mostly from Penn State Industries and then turn the wood to fit the kit. The kits range in price from $2 all the way up to $40-50 per kit, plus the wood. You can use just about any scrap of wood you want but I generally find myself using pieces of wood that have unique grain patterns. You can find highly figured pieces of wood such as comes from a burl fairly cheap. I think I got this piece of burled maple for about $5 so the total cost of the pen I am about to show you was $7-8 plus the 15 minutes it took to make.
Here is the blank made from burled maple, cut approximately in half. The longer piece is the end you grip when you write. This was just before I put them in the drill press to drill out the center hole where the pieces of the pen fit.
And here are the two pieces with the centers drilled out, brass tubes installed where the hardware fits, and the ends squared off.
Here it is on the lathe mostly turned down to the final size. You can see its still a bit rough around the edges.
Here it is with one coat of wax on it, still on the lathe. I cant remember exactly what finish I used on this one but I think its a high gloss wax.
And here is the final product with chrome hardware. A pen like nobody else has that uses standard Cross refills.
These are pretty simple once you get the hang of it, and they make great gifts. I buy the hardware kits online, mostly from Penn State Industries and then turn the wood to fit the kit. The kits range in price from $2 all the way up to $40-50 per kit, plus the wood. You can use just about any scrap of wood you want but I generally find myself using pieces of wood that have unique grain patterns. You can find highly figured pieces of wood such as comes from a burl fairly cheap. I think I got this piece of burled maple for about $5 so the total cost of the pen I am about to show you was $7-8 plus the 15 minutes it took to make.
Here is the blank made from burled maple, cut approximately in half. The longer piece is the end you grip when you write. This was just before I put them in the drill press to drill out the center hole where the pieces of the pen fit.
And here are the two pieces with the centers drilled out, brass tubes installed where the hardware fits, and the ends squared off.
Here it is on the lathe mostly turned down to the final size. You can see its still a bit rough around the edges.
Here it is with one coat of wax on it, still on the lathe. I cant remember exactly what finish I used on this one but I think its a high gloss wax.
And here is the final product with chrome hardware. A pen like nobody else has that uses standard Cross refills.
