What utility is reporting that figure? Have a screenshot? Note that 32-bit applications will still only be able to use at most 4 GB of memory, typically only 2 GB, even on a 64-bit system. But the extra memory can still be used by 64-bit apps (including the OS), and/or spread across multiple 32-bit apps.
I got it fixed, I reseated all the ram and set bios to default and then followed a pretty easy overclock guide on EVGA website. I now have my i7 920 showing all 6 gigs of ram and the CPU is running at 3.3(could go higher, but this is great for now).
Running absolutely silky smooth on Ultra, my buddies jaw hit the floor when he saw the graphics, he had never seen total war before. In a custom battle, the enemy did resort to some mob warfare, but they fired some muskets too.
I am sure if you asked him if he saw the melee bug, he wouldn't have noticed because he was looking at the battle in all its glory and the hand to hand looked pretty cool.
So I am pretty sure that those that deny there is a bug are too busy looking at the pretty graphics.
Yes but even if you see 6gb you need to enable memory remapping in your bios or it wont use its full memory.
What this feature does is amazing.
If not enjoy your setup.
For Windows Vista to use all 4 GB of memory on a computer that has 4 GB of memory installed, the computer must meet the following requirements:
Contact the computer vendor to determine whether your computer meets these requirements.
- The chipset must support at least 8 GB of address space. Chipsets that have this capability include the following:
- Intel 975X
- Intel P965
- Intel 955X on Socket 775
- Chipsets that support AMD processors that use socket F, socket 940, socket 939, or socket AM2. These chipsets include any AMD socket and CPU combination in which the memory controller resides in the CPU.
- The CPU must support the x64 instruction set. The AMD64 CPU and the Intel EM64T CPU support this instruction set.
- The BIOS must support the memory remapping feature. The memory remapping feature allows for the segment of system memory that was previously overwritten by the Peripheral Component Interconnect (PCI) configuration space to be remapped above the 4 GB address line. This feature must be enabled in the BIOS configuration utility on the computer. View your computer product documentation for instructions that explain how to enable this feature. Many consumer-oriented computers may not support the memory remapping feature. No standard terminology is used in documentation or in BIOS configuration utilities for this feature. Therefore, you may have to read the descriptions of the various BIOS configuration settings that are available to determine whether any of the settings enable the memory remapping feature.
- An x64 (64-bit) version of Windows Vista must be used.
Note When the physical RAM that is installed on a computer equals the address space that is supported by the chipset, the total system memory that is available to the operating system is always less than the physical RAM that is installed. For example, consider a computer that has an Intel 975X chipset that supports 8 GB of address space. If you install 8 GB of RAM, the system memory that is available to the operating system will be reduced by the PCI configuration requirements. In this scenario, PCI configuration requirements reduce the memory that is available to the operating system by an amount that is between approximately 200 MB and approximately 1 GB. The reduction depends on the configuration.
WTF is this about? It has nothing at all to do with his system, he's not running Vista and he's not using any of those chipsets.
@ OP, I have the EVGA E759 Classified motherboard running a similar BIOS to yours with an i7 920 and 6GB of Corsair Dominator 1600Mhz. DDR3 RAM, your memory (now that it shows 6GB) is being fully utilized by the system and there is no additional setting that you need to change to make it do so as Dogs990 suggests.
EVGA are crap full stop they most prob do not have remapping its easy as hell to find go into the bios look at your oc tweaker or memory in the bios and have a good look and find memory remapping im drunk wtf do you expect what ? yes i new it mate thats what i thought to you just go away GET OUT!!!!
I had to quote this in case he edits it later. Goofiest post ever![]()
Be quite you dam you soric ............. DAM YOU!!!!!!!
Can i not drink now...............................................................................
Goodniaty
seriously mate i cant do it ...
goodnit
Jeezes i feel worse than god dam anything mate this is what happens you see this is how i do it ............
Gtfo
So basically it's irrelevant and only makes a difference with 32bit OS's from what I read. And the feature itself seemed to be available only on older motherboards.BIOS memory remapping is used when your computer will not see all of the RAM you may have installed. It does not affect performance. So in other words, it doesn't matter what setting you use.
I had to quote this in case he edits it later. Goofiest post ever![]()
Consider yourself forgiven mateSorry about my posts dam what the hell happened last night sorry guys i got the worst headache my brain feels like its going to explode im really really sorry.
Consider yourself forgiven mate![]()
Consider yourself forgiven mate![]()
You forgive a man for a post that had nothing to do with you....lame.
your weak and to put someone else's mistake in your Sig is just weak.
It's your reminder to not get drunk again
EDIT: Which is weaker? The weak man posting crazy things while drunk, or the man that simply reminds him of doing so.
How did my thread turn into this......
Anyway I have the full 6gb of ram working now.
You guys should really PM each other if you want to discuss your drinking habits and the merits/negatives of drinking.
This is the room where everyone cares for you.
![]()
The Wiki's Modding Portal is the place to start looking for modding information.
The Wiki has Modding Index pages for most Total War games, listing tools, tutorials and resources.
View Total War Mods to find modifications that have already been undertaken.
As one of the most adaptable Total War games, naturally M2TW has a host of information on the Wiki:
You can view all the wiki content without an account.
However, do please apply for a wiki account, if you would like to edit pages, or save your viewing preferences.
Post in the TWC Wiki forum if you have any queries.
The Wiki has content for all three 'Rome' Total War games:
For more information about TWC past and present see:
The wiki has a portal for every game in the Total War Series.
Games from the original Shogun Total War, to Total War:Pharaoh are covered.
Information ranges from system requirements to load the games, to details on how to make a total conversion mod.