No Shrapnel shot?

**NobleStef80** · March 01, 2020, 01:09 PM

Hello!

I play as England and I have researched the Shrapnel Shot and I get no shrapnel shot ability for my 6 and 12 pounders!

Which Guns have it?

Thanks!

**Leonardo** · March 01, 2020, 03:38 PM

I don't think the 6 and 12 pounders ever get the sharpnel shot ability as it is reserved for the 24 pounder I think.

**NobleStef80** · March 02, 2020, 07:05 AM

Hello Leonardo!

Just for the 24 pounder? Are you sure?

Thanks!

**Leonardo** · March 02, 2020, 08:41 AM

~~I think so. Of course I could be wrong since it has been a while I played ETW at least the grand campaign and I think that's what your question is about.~~

Scratch that... I just checked and I was incorrect. Even the 6 pounder horse artillery (the 3 pounder horse artillery also get that?

) get the shrapnel shot ability.

Also, keep in mind that a building (engineer school for artillery) probably needs to be built before your artillery gets the shrapnel shot ability.

**NobleStef80** · March 02, 2020, 09:56 AM

Originally Posted by Leonardo

Even the 6 pounder horse artillery (the 3 pounder horse artillery also get that?

) get the shrapnel shot ability.

Also, keep in mind that a building (engineer school for artillery) probably needs to be built before your artillery gets the shrapnel shot ability.

Thanks for your reply!

But I have built the "Engineer School"... It enables the technology and I have already researched it!
All I get for my artillery is Ground shot and Canister shot.

I can't open the files to check about the problem with "Pack File Manager 5.0.2". By the way, what's with this program anyway? in the past I was able to open and modify my pack files, now I can't..

**Leonardo** · March 03, 2020, 12:13 PM

I think you're using too new PFM version hence for not being able to edit the pack files.

Try the PFM 1.5.9 and see if that works.

**NobleStef80** · March 03, 2020, 10:26 PM

Originally Posted by Leonardo

I think you're using too new PFM version hence for not being able to edit the pack files.

Try the PFM 1.5.9 and see if that works.

OMG! That worked! I would rep you again a hundred times if I could!
But how come an older version works and a newer doesn't? A pack file is a pack file isn't it?!!

Anyway, thanks again my friend!!!