yes i have the gem mod , the win 7 version. but i play the gem mod since october 2013 and had never this problem before
I renamed the dxgi.dll file and since this its worked,hahaha great thanks.
yes i have the gem mod , the win 7 version. but i play the gem mod since october 2013 and had never this problem before
I renamed the dxgi.dll file and since this its worked,hahaha great thanks.
Last edited by satyrus; May 29, 2014 at 12:33 PM.
no problem. i thought it would be most likely a problem with gem based on your issue Glad I have helped you at least in parts.
NEW: Total War Saga: Britannia benchmark thread - last update: 10.05.2018
HOW-TO-step-up-from-MBR-CSM-LEGACY-BOOT-to-UEFI-GPT
Many of my past contributions in the time from 2011-2017 will contain content that now show broken links. Unfortunately I had to delete all pictures linked on TWC that were hosted on imageshack.us. Read why
If you are missing anything of interest, please let me know. Sorry for any inconvinience caused.
Hi guys,
I have a problem because of my SLI. There is an annoying fog that makes the enemy units invisible, until they are very very close. Someone told me it is connected to the SLI. Do you know any fixes ?
I'm 99% percent sure it isn't. When I played several months ago there was no such problem. I know how the fog works and I find it really nice.
http://cloud-3.steampowered.com/ugc/...6807C6717691D/
Here you can see when the enemy spearmen became visible. These were normal celtic spearmen. This is around turn 7 or 8, so it cannot be special units. Also what you see here is just a small part of the enemy army.
Also I'm not the only one experiencing this problem.
Updated op with new driver details, nothin for R2 though..
I will test the driver Wolar and post the results in my thread (signature)
NEW: Total War Saga: Britannia benchmark thread - last update: 10.05.2018
HOW-TO-step-up-from-MBR-CSM-LEGACY-BOOT-to-UEFI-GPT
Many of my past contributions in the time from 2011-2017 will contain content that now show broken links. Unfortunately I had to delete all pictures linked on TWC that were hosted on imageshack.us. Read why
If you are missing anything of interest, please let me know. Sorry for any inconvinience caused.
Hello TWC community, hi wolar.
I noticed that the new final driver 340.53 solves some performance issues with patch 14 beta and will increase the overall performance on lower graphics preset and bring it to similar state we had with the previous driver release (340.43) and patch 13.
"high preset"
patch version performance comparison:
very high preset
NEW: Total War Saga: Britannia benchmark thread - last update: 10.05.2018
HOW-TO-step-up-from-MBR-CSM-LEGACY-BOOT-to-UEFI-GPT
Many of my past contributions in the time from 2011-2017 will contain content that now show broken links. Unfortunately I had to delete all pictures linked on TWC that were hosted on imageshack.us. Read why
If you are missing anything of interest, please let me know. Sorry for any inconvinience caused.
After the new nvidia driver 340.52 + patch 14 I have extreme bad performence.The game lags on campaign map and battle.CA do something !!!
Edictum mod adds new edicts to Rome II. http://www.twcenter.net / YouTube: Edictum Mod / Click here for Edictum Mod on steam
Vote Brain Slug for president.
I had the same problem with the 340.52 patch. Incredibly bad performance. Didn't matter what graphics settings either. I had to revert my drivers it was so bad.
if it is really the drivers issue then Nvidia is mainly in charge not CA. can you more exactly tell me about your used GPU, Wndows version and settings and where this happens?
maybe I can try to reproduce the issues.
NEW: Total War Saga: Britannia benchmark thread - last update: 10.05.2018
HOW-TO-step-up-from-MBR-CSM-LEGACY-BOOT-to-UEFI-GPT
Many of my past contributions in the time from 2011-2017 will contain content that now show broken links. Unfortunately I had to delete all pictures linked on TWC that were hosted on imageshack.us. Read why
If you are missing anything of interest, please let me know. Sorry for any inconvinience caused.
Is it me or is everyone getting a bad performance hit on 1.5. Mine was so bad that I went back to 14.1. Seems every new update is making the game worse. Graphics alone does not look clean anymore. this game is really starting to blow.
On the start new game campaign screen with driver 340.52 I was only getting 50 FPS. This driver made FPS drop significantly for me. I cleaned all Nvidia drivers off my system and did a fresh reload of the Nvidia 337.50 drivers and now my campaign screen 85-90 FPS now. Looks like 340.50 sucks. I will test battle mode next.
hard to tell would be better to see the comparable results in the benchmark. ingame situations aren't comparable. also you miss to name your used settings.
NEW: Total War Saga: Britannia benchmark thread - last update: 10.05.2018
HOW-TO-step-up-from-MBR-CSM-LEGACY-BOOT-to-UEFI-GPT
Many of my past contributions in the time from 2011-2017 will contain content that now show broken links. Unfortunately I had to delete all pictures linked on TWC that were hosted on imageshack.us. Read why
If you are missing anything of interest, please let me know. Sorry for any inconvinience caused.
I think I will run a test with patch 15 beta tomorrow and tell you what the performance is like for me on p15 and the 340.52 driver. So far I can tell you that on ultra settings
Patch 13.1 final - Win 8.1 Update 1, Nvidia 340.43 driver was the fastest "couple" but only ahead 1 fps average my rig compared to 14.1 final and 340.52 so not a major decrease like you experience. However I have no results on p15 beta yet. Stay tuned. I will care about this.
NEW: Total War Saga: Britannia benchmark thread - last update: 10.05.2018
HOW-TO-step-up-from-MBR-CSM-LEGACY-BOOT-to-UEFI-GPT
Many of my past contributions in the time from 2011-2017 will contain content that now show broken links. Unfortunately I had to delete all pictures linked on TWC that were hosted on imageshack.us. Read why
If you are missing anything of interest, please let me know. Sorry for any inconvinience caused.
Most on ultra. water and sky on medium, Units are extreme. Anisotropic x 16 on, Vignette on, SSAO on, Blood on, Anti-Aliasing off, V-Sync off, Distortion off, Vegetation off, Depth off
I had 340.52 driver running with patch 1.5. Graphics took a dive to 50 FPS or less on campaign map. A lot of lag on battle map. Funny thing though my FPS was jumping all over the place but the game crawled at points mainly in large city battles 40fps or worse. I deleted game entirely and reloaded fresh with the 1.4.1 patch and used 337.50 driver and my map is 85-90 fps and battles are 65-75fps or more depending on armies involved or how large city is. Now remember this a new campaign map so it is not very populated yet. I may drop in fps as game gets more populated.
Last edited by OSDEA7; September 02, 2014 at 11:47 PM.
It would be better to choose a preset so I am 100% sure I use the same settings. other than that you could also upload the preferences.script.txt.
NEW: Total War Saga: Britannia benchmark thread - last update: 10.05.2018
HOW-TO-step-up-from-MBR-CSM-LEGACY-BOOT-to-UEFI-GPT
Many of my past contributions in the time from 2011-2017 will contain content that now show broken links. Unfortunately I had to delete all pictures linked on TWC that were hosted on imageshack.us. Read why
If you are missing anything of interest, please let me know. Sorry for any inconvinience caused.
Did anyone face performance lows with the new driver 344.11 ...? I can't figure out if the sudden drop in performance is due to the driver or EE ...
i7 4780k
16GB Ram
GTX 680
Hi there I've tested the 344.11 against the 340.51 and do not see any noticeable improvements. Also I cannot confirm the massive improvements people are telling to have with patch 15 (Emperor edition). Other than that there are even more LoD issues with p15 than we had in p14 especially seen in the benchmark on trees.
I will release the full stats tomorrow! Linked in my signature. Promised.
NEW: Total War Saga: Britannia benchmark thread - last update: 10.05.2018
HOW-TO-step-up-from-MBR-CSM-LEGACY-BOOT-to-UEFI-GPT
Many of my past contributions in the time from 2011-2017 will contain content that now show broken links. Unfortunately I had to delete all pictures linked on TWC that were hosted on imageshack.us. Read why
If you are missing anything of interest, please let me know. Sorry for any inconvinience caused.
Op updated with new driver information.