help with the requirements of my pc to run shogun 2 TW

**Relativista** · March 05, 2011, 05:00 PM

I wonder in what way should I run the second shogun total war? For example medium-low, medium-high heat.

Requirements of my pc:

Processor: Intel Pentium Dual-Core CPEU T4400@2.2 GHZ
RAM: 4 GB
Graphics Card: ATI Mobility Radeon HD 4500 Series
Operating system: Windows 7 Home Premium 64-bit

**BunnyPoopCereal** · March 05, 2011, 05:07 PM

it depends on how many units per side

**The Hedge Knight** · March 05, 2011, 05:08 PM

Whatever runs well

. But your looking fairly low range with that im afraid.

**Relativista** · March 05, 2011, 05:16 PM

I want a way that goes well in all the battles

**BunnyPoopCereal** · March 05, 2011, 05:18 PM

your RAM is good enough, so is your CPU and OS, you need a NEW GPU aka Graphics Card

Look in newegg.com for good deals

**Relativista** · March 05, 2011, 05:41 PM

Yeah, but if I continue with these requirements can play up in that mode without the game slow down? It's that I have a laptop

**Raimeken** · March 05, 2011, 05:43 PM

you will experience definite slowdowns when you zoom in, how is your demo performance? Just take that, reduce it by like 20 or 30% to see what the performance would be like with AA

**Relativista** · March 05, 2011, 06:12 PM

I run the demo at medium with some ease definitions ..

The performance is worse with the original?

**BunnyPoopCereal** · March 05, 2011, 06:25 PM

the original will probably be better, but even if it is better it wont be a miracle better, honestly mate if you're using a laptop I would suggest using a desktop to play games

You will likely have to play with low settings and standard or low unit sizes

**Relativista** · March 05, 2011, 06:27 PM

But by chance run well at all in medium and large unit.

I have yet another question, why is that dead men disappear after a while? In other TW stayed on the ground until the end of battle

**Raimeken** · March 05, 2011, 06:37 PM

Are you talking about the first battle perchance? In that battle there is another fight going on in the same map, the dead body count is also counting that one too

**Relativista** · March 05, 2011, 06:39 PM

All battles in the demo that I made the men disappeared after a time

**BunnyPoopCereal** · March 05, 2011, 06:49 PM

yeah this is happening in every battle, I suspect it is because the more dead bodies the more lag due to use in Memory, but that could be causing a Leak of memory... mhm....

**Relativista** · March 05, 2011, 06:57 PM

Without the dead on the floor is unrealistic

**Nosjack** · March 05, 2011, 10:39 PM

The processor is a little low but it's fine. I have a single core 2.2 and it ran on low/medium rather well.

Upgrade your graphics card and you'll be able to play at least medium with large unit sizes.

**Relativista** · March 06, 2011, 07:11 AM

Is already more or less savvy way to play

**Relativista** · March 06, 2011, 09:25 AM

I used it in demo mode high, and ran well, even in large battles .. Does the original game can also run on high without lag?

My pc ran fine, except for the archers, they seemed sluggish through when shooting arrows, but only that the archers ..