BI madnessss

**CrayonVonCaesar** · January 30, 2006, 11:03 PM

Im getting this error msg when I try to load up.
The onager unit has the same range as the old Rtw onagers did so Im confused
I have not changed anything about this unit:

Anyone help?

**John I Tzimisces** · January 30, 2006, 11:12 PM

If you are sure you didn't change anything, I would recommend reinstalling BI, and patching to 1.6...

**Kinjo** · January 30, 2006, 11:21 PM

Are you running the show_error command? If so that is your problem you need to remove it from the executable or delete the short cut that is using the show_error command. If that is not your problem delete the entire folder - first uninstall the program then go to the dir in which the folder is located and delete the entire folder. Then at this point you would reinstall and it should work fine.

**Feldspar** · January 30, 2006, 11:51 PM

....shouldn't he just open up the unit text specified and find the alemanni onagers and change the range from 300 to no more than 203. would check all the other onagers to make sure they don't suffer from the same issue.

**mike^_^** · January 30, 2006, 11:54 PM

there's also something gay in BI where you have to match the velocity with the range in correct proportions, that might be a problem as well

**CrayonVonCaesar** · January 30, 2006, 11:16 PM

I have added the Late roman army mod and upped the morale of all units by 5, but thats all.
I havent touched these onagers and the entry is the same as it was when I installed.
I dont want to reinstall unless its totally necessary.

Any ideas anyone.
Cheers.