Results 1 to 2 of 2

Thread: Ram Combustion

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default Ram Combustion

    Has anyone else had this issue? In M2TW original it seems as though every time a ram gets close to a gate it suddenly bursts into flames (the Kingdoms rams are still working), Normally I would try to work around this although with how AI plays (tons of rams, only a ladder or two else) it's a bit of a game breaker, as soon as their ram breaks every troop immediately mobs the nearest ladder slowing the frame rate down to about 1 every 10 seconds.


    I tried adjusting the flammability settings of the rams but it doesn't seem to have done much good, does anyone have any advice?

  2. #2
    irishron's Avatar Cura Palatii
    Moderator Emeritus

    Join Date
    Feb 2005
    Location
    Cirith Ungol
    Posts
    47,023

    Default Re: Ram Combustion

    That part of the ai as far as I know is hardcoded. There are mods that have the ai building different units but what you are describing is what CA wrote for ai code.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •