Hey
Changing the looks of preexisting units and their textures requires some work, but can be done simply by
copying moving, and
renaming!! First lets say, if you want to change the Ithilien Rangers to Athala Rangers or even Sindar Archers (that does not sound right) then you have to change the unit's textures as well as attatchments (bows or shields) and their meshes.
STEP 1: Find your unit you want to change and the unit that you want to change to
- This can be found in modelsdb file located in
unit_models in Third_Age/data
- I recommend using the "find" function to find your units.
- under the units find the location and names of the texture, attatchment, and mesh files
- For example:
1
4 None
17 MTW2_Fast_Javelin
19 MTW2_Fast_Swordsman 2
20 MTW2_Javelin_primary
14 fs_test_shield 2
18 MTW2_Sword_Primary
14 fs_test_shield
16 -0.090000004 0 0 -0.34999999 0.80000001 0.60000002
14 fountain_guard
1 1
47 unit_models/_Units/EN_Lmail_Hmail/xx7_lod0.mesh 6400
1
6 sicily
72 unit_models/_Units/EN_Lmail_Hmail/textures/en_xmail_xmail_poland.texture
72 unit_models/_Units/EN_Lmail_Hmail/textures/en_xmail_xmail_normal.texture
45 unit_sprites/sicily_fountain_guard_sprite.spr
1
6 sicily
58 unit_models/AttachmentSets/Final guard_poland_diff.texture
58 unit_models/AttachmentSets/Final guard_poland_norm.texture 0
The BLUE represents the mesh of the unit
The RED represents the different textures of the unit
The PURPLE represents the sprites (unit cards) of the unit
The GREEN represents the Attatchments and ordinances
STEP 2: After you have found the files of your changing unit above (exclude the sprites if you want same unit cards) and the files of the unit that you are going to change to, copy and paste the files of the units you are going to change
- Copy them all and paste them so somewhere so that you will not confuse with other files
- Rename them (Mesh 1 to Mesh A, Texture 1 and Texture 2 to Texture A and Texture B)
- Paste the renamed files back to where your changing unit's textures and meshes are.
- It will ask you to replace the files- Do it
-
Also be aware that most units have upgraded units also. You have to do the same for upgrades to avoid graphical bugs and crashes and see the entire change
STEP 3: Close modeldb if it says "Do you want so Save?" click cancel because you should not be changing anything in modelsdb!!!!
- If it does not show the main menu or intro screen, then you have done something wrong
If you have anyquestions, reply or send me a PM
Thanx, hope for your best gameplay!!
Regards
STELLover