sorry to report this...but the tsv extraction doesn't work as it should...
sorry to report this...but the tsv extraction doesn't work as it should...
Erasmo
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601)
System Manufacturer: ASUSTeK Computer Inc.
System Model: G73Sw
Processor: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz (8 CPUs), ~2.0GHz
Memory: 12288MB RAM
Available OS Memory: 12266MB RAM
Page File: 2634MB used, 21881MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 32bit Unicode
No, it's not a mistake.
I use OpenOffice which doesn't have the option to open .tsv, only .csv; then you can choose the separator so I stuck with tabs.
Also the escaping of quotes is different between the two.
Yes I can add them.
Note though that you can always right click->Open as text.
That looks seriously broken...
What's a "mixed header pack"?I get these throw whenever I try to open PFM with mixed header packs in my data folder.
Packs always have one header.
Check out the Warscape Modding Primer, it should get you going.
You really need to be more specific than that. If you're using OpenOffice, try setting the extraction to .csv (Options->Extract TSV file extension).
Last edited by daniu; September 17, 2013 at 01:47 AM.
Tools: PFM 4.1 - EditSF 1.2.0
(Download PFM - Download EditSF)
Warscape Modding Guide
Join the PFM User Group on Steam to receive PackFileManager update notifications.
Respecto Patronum
Programs can provide conversion language, eg: English Transform Traditional Chinese?
Modified into a garbled display
Never mind, deleted.
Last edited by Southern Hunter; September 17, 2013 at 08:45 AM.
Daniu, I think the specific patch I mentioned in my earlier post was made with an old version of PFM (pre-RTW2). However that file no longer reads for me in the latest PFM/schema version, instead crashing. It did read before.
Last edited by Livebyte; September 17, 2013 at 02:17 PM. Reason: typo
You've probably already answered this somewhere, but I'm a lazy bastard so I'll ask it any way.
Is there any way to open trait_attribute_effects under trait_attribute_effects_tables?
It's blue at the moment. The reason why I want to open it is because I want to modify the "mighty_knockback" attribute to recreate the berserkers that we had in Rome 1, for scientific reasons only of course
DaniuWhen I pressed the button for the TSV extraction...nothing happened...got Notepad++ and Textpad on my computer...You really need to be more specific than that. If you're using OpenOffice, try setting the extraction to .csv (Options->Extract TSV file extension).
Last edited by Condottiere SOG; September 17, 2013 at 10:28 PM.
Erasmo
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601)
System Manufacturer: ASUSTeK Computer Inc.
System Model: G73Sw
Processor: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz (8 CPUs), ~2.0GHz
Memory: 12288MB RAM
Available OS Memory: 12266MB RAM
Page File: 2634MB used, 21881MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 32bit Unicode
Think I may have found a bug. If you rename a file in the PFM and press del while doing so the program will see that as wanting to delete the file.
unknowns revelead for ancillaries_tables
for some reason references of names_tables cannot be solvedCode:<table table_name='ancillaries_tables' table_version='7' guid='20b6898d-f709-4c75-9137-b5d0111ed796'> <field fkey='ancillary_info_tables.ancillary' name='key' type='string_ascii' pk='true' /> <field fkey='ancillary_types_tables.type' name='type' type='string_ascii' /> <field name='applies_to' type='string_ascii' /> <field name='transferrable' type='boolean' /> <field name='unique_to_world' type='boolean' /> <field name='unique_to_faction' type='boolean' /> <field name='precedence' type='int' /> <field name='start_date' type='int' /> <field name='end_date' type='int' /> <field name='explanation_text' type='optstring_ascii' /> <field name='exclusion_text' type='optstring_ascii' /> <field name='avatar_skill' type='optstring_ascii' /> <field name='avatar_special_ability' type='optstring_ascii' /> <field name='is_wife_ancillary' type='boolean' /> </table>
Last edited by PietroMicca; September 18, 2013 at 08:51 AM.
To install it is asking me to point where STW is, but if STW is shogun I have not got it. It is giving me error. I cannot see any instructions about it.
Last edited by Bethencourt; September 18, 2013 at 12:42 PM.
Bethencourt's 1800
NAVAL MODDING
& Modeling. Milkshape and UU3D. With (more than) colaboration of Wangrin.
It pointed to ETW for me and just sent it to R2 data...shouldn't be a problem.
Erasmo
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601)
System Manufacturer: ASUSTeK Computer Inc.
System Model: G73Sw
Processor: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz (8 CPUs), ~2.0GHz
Memory: 12288MB RAM
Available OS Memory: 12266MB RAM
Page File: 2634MB used, 21881MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 32bit Unicode
No, not working.
Bethencourt's 1800
NAVAL MODDING
& Modeling. Milkshape and UU3D. With (more than) colaboration of Wangrin.
Well the current PFM should be able to read all earlier packs, but I suppose a broken version was used to create it.
If you post the pack, I might be able to repair it.
Those tables are empty (the blue is indicating that).
It seems they aren't used by the game.
Does anybody else have this problem?
Added the ancillaries, will release new schema in a few days.
Haven't gotten around to checking the names table yet.
In case anyone hasn't seen, Pietro is the single largest contributor to decoding the DB tables with about 50% of all tables decoded or corrected by him.
You should really +rep him if you're using PFM.
You should be able to just cancel and it will be fine (I think it also says in the dialog).
Tools: PFM 4.1 - EditSF 1.2.0
(Download PFM - Download EditSF)
Warscape Modding Guide
Join the PFM User Group on Steam to receive PackFileManager update notifications.
Respecto Patronum
Last edited by Bethencourt; September 18, 2013 at 02:48 PM.
Bethencourt's 1800
NAVAL MODDING
& Modeling. Milkshape and UU3D. With (more than) colaboration of Wangrin.
danui, I've been looking at the source code. You've really added in some great features. Nice work!
Having a PFM is a wonderful thing...thank you, Daniu!
Erasmo
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601)
System Manufacturer: ASUSTeK Computer Inc.
System Model: G73Sw
Processor: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz (8 CPUs), ~2.0GHz
Memory: 12288MB RAM
Available OS Memory: 12266MB RAM
Page File: 2634MB used, 21881MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 32bit Unicode
Some help would be apreciated.
Bethencourt's 1800
NAVAL MODDING
& Modeling. Milkshape and UU3D. With (more than) colaboration of Wangrin.
Has anyone been able to decode battle_types_to_victory_conditions properly? It's a strange one where battle_type field entry gets 00 between each letter in binary format. I think this file may be the key to eliminating victory points for all battles.
Maratha Light Infantry - http://www.sendspace.com/file/ibfygu
Col. Michael Kováts Hussars - United States - http://www.sendspace.com/file/j272k5
Norske Geworbne & Trondhjemske Regiment - Norway - http://www.sendspace.com/file/tmvpk6
Links updated 06.05.13
There's something strange in that table
it's correct, but I think that is unusual to have string and string_ascii (even if optional) in the same table.Code:<table table_name='battle_types_to_victory_conditions_tables' table_version='2' guid='373e5215-c1e3-44cc-be62-24e452821d63'> <field fkey='battle_types_tables.type' name='battle_type' type='string' pk='true' /> <field fkey='victory_conditions_tables.condition' name='attacker_victory_condition' type='optstring_ascii' pk='true' /> <field fkey='victory_conditions_tables.condition' name='defender_victory_condition' type='optstring_ascii' pk='true' /> </table>