DDS Question

**PSYCHO V** · July 02, 2010, 04:07 AM

I can edit ETW dds files no prob but had a try with NTW and I get an error:

Could not complete your request because of a problem with the file-format module interface

Have dds files changed in NTW? Any ideas?

**georider** · July 02, 2010, 04:59 AM

No the dds are not changed you edit with photoshop with new plug in. the new is that they are huge 4048x4048 and therefor your system maybe unable to save them. You need more RAM at least 4 and an operating 64 bits system for stability

**The Hedge Knight** · July 02, 2010, 05:45 AM

Probably mmeans you are in the wrong colour mode, set it to rgb and try again.

**PSYCHO V** · July 02, 2010, 07:15 AM

Thanks guys

Originally Posted by georider

No the dds are not changed you edit with photoshop with new plug in. the new is that they are huge 4048x4048 and therefor your system maybe unable to save them. You need more RAM at least 4 and an operating 64 bits system for stability

Ouch ...really?

------------------
System Information
------------------

Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.090206-1234)
Language: English (Regional Setting: English)
System Manufacturer: INTEL_
System Model: DP965LT_
BIOS: Default System BIOS
Processor: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz (2 CPUs)
Memory: 2030MB RAM
Page File: 339MB used, 5536MB available
DirectX Version: DirectX 9.0c (4.09.0000.0904)

---------------
Display Devices
---------------
Card name: Radeon X1950 Series
Manufacturer: ATI Technologies Inc.
Chip type: ATI Radeon Graphics Processor (0x7240)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_7240&SUBSYS_0B121002&REV_00
Display Memory: 512.0 MB
Current Mode: 1024 x 768 (32 bit) (75Hz)

Is that what you're referring to? Seems I'm short.

Originally Posted by Josst

Probably mmeans you are in the wrong colour mode, set it to rgb and try again.

I think it's set to RGB .... North American Default / sRGB IEC61966-2.1 ?